PELATIHAN PEMBUATAN PROPELLER MOTOR KETEK MENGGUNAKAN TANUR CRUCIBLE DI KAMPUNG WANINGGAP NANGO

  • Kelemens A Rahangmetan Jurusan Teknik Mesin, Fakultas Teknik, Universitas Musamus
  • Marsujitullah Marsujitullah Jurusan Informatika, Fakultas Teknik, Universitas Musamus
Keywords: casting industry, propeller, Waninggap Nanggo village

Abstract

The propeller casting training was carried out in Waninggap Nanggo village by involving youngpeople who were given casting training in order to make a ketek motor propeller, so as to producereliable human resources (HR) in Waninggap Nanggo village who of course would provideprovisions for the use of increasingly developing technology. Purpose Casting training for homeindustries is a technology in which village youths are trained to be able to do casting whose rawmaterial comes from used aluminum which also has good mechanical properties because there isa mixture of the alloys found in the aluminum. In the ketek motor propeller casting training is atraining that uses a crucible furnace as a tool for melting aluminum, where the use of the fuelused certainly has an influence during the aluminum smelting process, so bus wood is analternative because bus wood is widely available in Merauke district bus wood has a goodcalorific value in the aluminum smelting process, which is around 3928 - 4106 kcal / kg. Thishousehold-scale casting industry training is also a new idea, because in Merauke district there isno aluminum casting industry, especially the manufacture of two blade (two-leaf) outboard motorpropellers with a size of 10 mm and managed to produce 5 propellers from the training results.implemented, therefore this training will continue to be developed so that the community inWaninggap Nanggo village because in this training the community has been able to make anoutboard / ketek motor propeller which is usually used alone or can be used as a livelihood forthe community who of course work together. with the village government of Waninggap Nanggoso that it can continue to be developed.

References

Basuki. (2004). No Title. Teknik Pengecoran, Option Metallurgi ITB.
Deddy, R. (2008). No Title. Analisis Pengaruh Investasi, Tenaga Kerja , Dan Pengeluaran
Pemerintah Terhadap Pertumbuhan Ekonomi Di Propinsi Jawa Tengah.
Klemens A. Rahangmetan, Christian Wely Wullur, F. S. (2018). pengaruh bentuk saluran atas
dengan riser untuk mengurangi cacat coran pada pengecoran propeller kapal dengan
paduan Al7075, 1, 30–34.
Mi Guofa, Liu Xiangyu, W. K. (n.d.). No Title. Numerical Simulation of Low Pressure DieCasting Aluminum Wheel.
Rahman, A. (2013). No Title. Pengaruh Persepsi Mahasiswa Tentang Profesi Guru Dan Prestasi
Belajar Terhadap Minat Menjadi Guru Akuntansi Pada Mahasiswa Program Studi
Pendidikan Akuntansi Fakultas Keguruan Dan Ilmu Pendidikan Universitas
Muhammadiyah Surakarta Angkatan 2011/2012.
Roziqim, K. (2012). No Title. Pengaruh Model Sistem Saluran Pada Proses Pengecoran
Aluminium Daur Ulang Terhadap Struktur Micro Dan Kekerasan Coran Puli Diameter 76
Mm Dengan Cetakan Pasir.
S, T. H. dan S. (2010). No Title. Pengaruh Model Saluran Tuang Pada Cetakan Pasir Terhadap
Hasil Cor Logam.
Teguh Raharjo, W. S. (2010). No Title. Analisis Pengaruh Temperatur Penuangan Dan
Temperatur Cetakan Terhadap Sifat Mekanis Bahan Paduan Al-Zn
Published
11-01-2021
How to Cite
Rahangmetan, K., & Marsujitullah, M. (2021). PELATIHAN PEMBUATAN PROPELLER MOTOR KETEK MENGGUNAKAN TANUR CRUCIBLE DI KAMPUNG WANINGGAP NANGO. Musamus Devotion Journal, 3(1), 37-46. Retrieved from https://ejournal.unmus.ac.id/index.php/devotion/article/view/3358